sumber:http://tizzycrafts.blogspot.co.uk
Cut 2 squares out of the oilcloth - I cut my squares 10cm using a
pinking rotary cutter as I like the finish, but its not essential as
oilcloth doesn't fray. The zip is a 4" zip
Sew the 2 squares onto the zip as shown, lining the second one up with the first one
It should look like this when you have finished.
Clip and sew 2 sides of the square - leave the zip closed while you do this and leave the side closest to the zipper open
It should look like this when done, with the zip partially open
If you want to add a ribbon tag with either a trigger fastener or split
ring, then now is the time to do, you will turn the case inside out so
place the ribbon tag on the inside of the case as shown and hold it in
place with a clip as shown (Oilcloth shouldn't be pinned, but if you
don't have wonder clips you can use paper clips or binder clips)
Bring the zip seam across to the clip holding the ribbon tag and clip it in, this will give you the shape of your case.
Sew across this seam - take your time sewing across the zip to make sure
it stays in place, trim ends of zip if needed and cut loose thread. You
can also trim the corners to help it sit better.
Turn inside out and admire your lovely new case.
Waaalaaa....cam senang je kan..jom try sesama nak tak?
0 Komen:
Catat Ulasan